IMO FTPC Part 2: Smoke and toxicity – Fire Test to Marine Equipment

Article

&
 Ecosafene Products Service Co.,Ltd have rich experience to provide IMO FTPC part 2 fire test to Marine Equipment 
 
Ä IMO MSC 61(67) - Introduction
Ships sailing in International Waters need to meet the requirements of SOLAS. The EU and USCG require certification of products placed on board these ships and other Flag States require Type Approval Certificates to be issued for products. Fire test reports are not accepted alone and you will need to contact a notified body for marine Certification to attain these documents, and the test shall comply with the IMO Resolution MSC 61(67).
 
ü MO MSC 61(67) - Standard
        IMO MSC 61(67)Adoption of the international code for application of fire test procedures
 
Ä IMO MSC 6167/ IMO FTPC Part 2: Fire test to smoke and toxicity
ü Reference Standard
        ISO 5659:1994 – Plastics-Smoke generation, Part 2 Determination of optical density by a single chamber test
 
ü Application:
Where a material is required not to be capable of producing excessive quantities of smoke and toxic products or not to give rise to toxic hazards at elevated temperatures, the material shall comply with this part.
 
ü The specific optical density in each mode should not exceed the specified limits:
 
Type Of Product
Specific Optical Density Requirements
Surface of bulkheads, linings, or ceilings
Dm≤200
Floor coverings
Dm≤500
Primary deck coverings
Dm≤400
Plastic pipes and cables
Dm≤400
 
ü The concentration measured in any test mode should not exceed the specified limits:
 
        CO1450ppm
        HBr600ppm
        HCl600ppm
        HCN140ppm
        HF600ppm
        SO2120ppm
        NOx350ppm
 
Ä Wheel Mark and USCG (United State Coast Guard) 
At the same time, equipment carried on board ships registered under the flags of the European Union Member States should be tested in accordance with the Marine Equipment Directive 96/98 EC (MED) and achieve Wheel mark Certificate, Also, equipment carried on board ships registered in America should achieve USCG Certificate
 
Ä Fire Test to Marine Equipment according to IMO MSC 61(67) / IMO FTPC
ü IMO MSC 61(67) / IMO FTPC Part 1: Non-combustibility test
ü IMO MSC 61(67) / IMO FTPC Part 2: Smoke and toxicity test
ü IMO MSC 61(67) / IMO FTPC Part 3: Test for A,B and F Class Divisions
ü IMO MSC 61(67) / IMO FTPC Part 4: Fire Test for fire door control system
ü IMO MSC 61(67) / IMO FTPC Part 5: Fire Test for surface flammability
ü IMO MSC 61(67) / IMO FTPC Part 6: Fire Test for primary deck coverings
ü IMO MSC 61(67) / IMO FTPC Part 7: Fire Test for vertically supported textiles and films
ü IMO MSC 61(67) / IMO FTPC Part 8: Fire Test for upholstered furniture
ü IMO MSC 61(67) / IMO FTPC Part 9: Fire Test for bedding components
ü IMO MSC 40(64) / ISO 9705 and ISO 5660: Test
ü WheelMark - MED 96/98/EC
ü Certification for USCG (US Coast Guard)
----------------------------------------------------------------------------------------------------------------------
[ Add to Favorites ]  [ Print this page ]  [ Close the window ]  [ Back to top ]
Copyright EcoSafene  闽ICP备09009213号-1