IMO FTPC Part 9: Bedding Components - Fire test to Marine Equipment

Article

&
 Ecosafene Products Service Co.,Ltd have rich experience to provide IMO FTPC part 9 Bedding components fire test to Marine Equipment 
 
Ä IMO MSC 61(67) - Introduction
Ships sailing in International Waters need to meet the requirements of SOLAS. The EU and USCG require certification of products placed on board these ships and other Flag States require Type Approval Certificates to be issued for products. Fire test reports are not accepted alone and you will need to contact a notified body for marine Certification to attain these documents, and the test shall comply with the IMO Resolution MSC 61(67).
 
ü IMO MSC 61(67) - Standard
        IMO MSC 61(67)Adoption of the international code for application of fire test procedures
 
Ä IMO MSC 6167/ IMO FTPC Part 9: Fire test for bedding components
 
ü References Standard
        Resolution A.688(17) – “Fire test procedures for ignitability of bedding components”
        ISO 5659:1994 – “Plastics-Smoke generation, Part 2 Determination of optical density by a single chamber test”.
        ISO 1716:1973 – “Building materials – Determination of calorific potential”
 
ü Application
Where bedding components are required to have qualities of resistance to the ignition and propagation of flame, the bedding components shall comply with this part.
 
Ä Wheel Mark and USCG (United State Coast Guard)
At the same time, equipment carried on board ships registered under the flags of the European Union Member States should be tested in accordance with the Marine Equipment Directive 96/98 EC (MED) and achieve Wheel mark Certificate, Also, equipment carried on board ships registered in America should achieve USCG Certificate
 
Ä Fire Test to Marine Equipment according to IMO MSC 61(67) / IMO FTPC
ü IMO MSC 61(67) / IMO FTPC Part 1: Non-combustibility test
ü IMO MSC 61(67) / IMO FTPC Part 2: Smoke and toxicity test
ü IMO MSC 61(67) / IMO FTPC Part 3: Test for A,B and F Class Divisions
ü IMO MSC 61(67) / IMO FTPC Part 4: Fire Test for fire door control system
ü IMO MSC 61(67) / IMO FTPC Part 5: Fire Test for surface flammability
ü IMO MSC 61(67) / IMO FTPC Part 6: Fire Test for primary deck coverings
ü IMO MSC 61(67) / IMO FTPC Part 7: Fire Test for vertically supported textiles and films
ü IMO MSC 61(67) / IMO FTPC Part 8: Fire Test for upholstered furniture
ü IMO MSC 61(67) / IMO FTPC Part 9: Fire Test for bedding components
ü IMO MSC 40(64) / ISO 9705 and ISO 5660: Test
ü WheelMark - MED 96/98/EC
ü Certification for USCG (US Coast Guard)
----------------------------------------------------------------------------------------------------------------------
[ Add to Favorites ]  [ Print this page ]  [ Close the window ]  [ Back to top ]
Copyright EcoSafene  闽ICP备09009213号-1