ISO 1716 Determination of the heat for building products (International Standard)
ISO 1716 Determination of the heat for building products (International Standard)
ISO 1716 Determination of the heat (International Standard)
ISO 1716: Reaction to fire tests for building Products- Determination of the heat of combustion
ISO 1716 Determination of the heat (International Standard)– Scope
The bomb calorimeter is the most common device for measuring the heat of combustion or calorific value of a material. With this apparatus a test specimen of specified mass is burned under standardized conditions. The heat of combustion determined under these conditions is calculated on the basis of the observed temperature rise while taking account of heat loss. The combustion process is initiated inside an atmosphere of oxygen in a constant volume container, the bomb, which is a vessel built to withstand high pressures. It is immersed in a stirred water bath, and the whole device is the calorimeter vessel. The calorimeter vessel is also immersed in an outer water bath. The water temperature in the calorimeter vessel and that of the outer bath are both monitored.
ISO 1716 Determination of the heat (International Standard)– GB 14402
The bomb calorimeter is the most common device for measuring the heat of combustion or calorific value of a material. With this apparatus a test specimen of specified mass is burned under standardised conditions.
- GB/T 14402 Reaction to fire test for building materials and products-Determination of the heat of combustion
ISO 1716 Determination of the heat (International Standard)–Term or Definition
Determination of the heat
This test determines the potential maximum total heat release of a product when completely burning, regardless of its end use.
ISO 1716 Determination of the heat (International Standard)–Other Standard
EN 13501-1: Fire classification of construction products and building elements- Part1: Classification using data from reaction to fire tests
EN 13823, Reaction to fire tests for building products. Building products excluding floorings exposed to the thermal attack by a single burning item
EN ISO 1182, Reaction to fire tests for building products. Non-combustibility test
EN ISO 9239-1, Reaction to fire tests for floorings. Part 1: Determination of the burning behaviour using a radiant heat source
EN ISO 11925-2, Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame . Part 2: Single-flame source test
----------------------------------------------------------------------------------------------------------------------