EN 13823 Building products- single burning item test
Article

EN 13823 Building products- single burning item test
 
EN 13823 single burning item
EN13823 Reaction to fire tests for building products ― Building products excluding floorings exposed to the thermal attack by a single burning item
 
EN 13823 single burning item- Standard Scope
Most construction products sold in Europe will shortly need to be tested and classified using a new test method called the Single Burning Item (the SBI) EN 13823. The construction products directive of the European commission will require that all European Member states eventually use this, instead of the traditional regulatory methods used in each country, to classify most building products.
 
The Commission recently defined the criteria for assessing building products into classes A-F. These are given in the table below. Though other test methods are required the SBI is needed to classify all non flooring products into the classes A2, B, C and D which are the major classes inhabited by most products other than those that are principally inorganic classified as non-combustible.
 
EN 13823 single burning item- Sample size
1500mmx1000mm* 5 PCS
1500mmx495mm* 5 PCS
 
EN 13823 single burning item - Term or Definition
 
Single Burning Item
This test evaluates the potential contribution of a product to the development of a fire, under a fire situation simulating a single burning item in a room corner near to that product.
 
EN 13823 single burning item - other Standard 
EN 13501-1: Fire classification of construction products and building elements- Part1:
Classification using data from reaction to fire tests
EN ISO 1182, Reaction to fire tests for building products. Non-combustibility test 
EN ISO 1716, Reaction to fire tests for building products. Determination of the heat of combustion 
EN ISO 9239-1, Reaction to fire tests for floorings. Part 1: Determination of the burning behaviour using a radiant heat source
EN ISO 11925-2,Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame . Part 2: Single-flame source test
 
 
 
----------------------------------------------------------------------------------------------------------------------
[ Add to Favorites ]  [ Print this page ]  [ Close the window ]  [ Back to top ]
Copyright EcoSafene  闽ICP备09009213号-1